Unreasonable or incompatible design of the inlet channel of the unit, improper submergence depth of the water pump, and unreasonable start-up and shutdown sequence of the unit can all deteriorate the inlet conditions, generate vortices, induce cavitation, or exacerbate the vibration of the unit and pump room. When starting a unit that uses a broken siphon vacuum cutoff, if the air in the hump section is difficult to carry and the siphon time is too long; The design of the tapping door for the unit that cuts off the flow is unreasonable, constantly hitting the tapping door seat with intermittent opening and closing; Uneven settlement or poor rigidity of the foundation supporting the water pump and motor can also cause vibration of the unit.
When users choose water pumps, it is best to go to a sales point recognized by the agricultural machinery department and be sure to identify the manufacturer. It is recommended to give priority consideration to purchasing a submersible pump with water filling, and carefully check the brand and product quality certificate. Never purchase "three no" (i.e. no manufacturer, no production date, no production license) products, otherwise if problems arise, users will be helpless.
As a user, due to the limitations of professional knowledge, it is difficult to make a decision. The best way is to consult experts in water pumps, and it is also advisable to consult some old water pump users, especially those with similar usage conditions. Buying products that users trust, reliable in quality, and relatively mature is a wise choice. Meanwhile, the use of single-phase or three-phase pumps should be determined based on the local power supply situation.
Reason for noise
The loud noise of the water pump may be due to the following reasons:
(1) The impact of the rotary blade on the cylinder body, the residual volume of the water pump, and the sound of pressure oil in the exhaust dead gap;
(2) Impact of exhaust valve disc on valve seat and supporting components;
(3) Echo and bubble burst sound inside the box;
(4) Bearing noise;
(5) Noise caused by a large amount of gas and oil impacting the oil baffle;
(6) Others. Such as noise caused by transmission, fan noise of air-cooled water pumps, etc.
(7) Motor noise is a crucial factor.




