Nov 10, 2025 Leave a message

What is cavitation phenomenon

The cavitation of a water pump is caused by the vaporization of water, which is the process of water transforming from liquid to vapor state. The vaporization of water is related to temperature and pressure. At a certain pressure, water only begins to vaporize when the temperature rises to a certain value; If the pressure drops to a certain value at a certain temperature, water will also vaporize, and this pressure is called the vaporization pressure of water at that temperature. If the pressure in a certain local area during the flow process is equal to or lower than the vaporization pressure corresponding to the water temperature, water will vaporize at that location. After vaporization occurs, many small bubbles of steam and gas mixture will be formed. When bubbles flow from the low-pressure area to the high-pressure area along with the water flow, the bubbles rupture under the action of high pressure, and high-pressure water flows towards the space occupied by these original bubbles at a very high speed, forming an impact force. The metal surface is severely damaged due to fatigue caused by water hammer pressure. Therefore, the process of bubble formation, development, and rupture leading to material damage is called cavitation phenomenon.
Reasons for efficiency decline
1. Due to the erosion of water flow, the inner wall of the pump channel and the water surface of the impeller become rough and uneven, and the friction coefficient of the flow channel inside the pump increases. In addition, the flow velocity of water inside the pump is very high, resulting in an increase in head loss. Hydraulic efficiency decreases.
2. Due to the addition of medication or water quality before the pump, severe scaling or corrosion may occur inside the pump casing. Severe accumulation of scale inside the pump casing can increase the wall thickness by about 2ram, and the formation of scale nodules on the inner wall of the water pump can reduce the volume of the pump body, decrease the pumping volume, and make the flow channel rough, resulting in increased head loss. Both passenger flow efficiency and hydraulic efficiency have decreased.
3. Due to casting defects, cavitation, abrasion, corrosion, and chemical erosion caused by the water pump processing technology, voids or cracks are formed in the pump flow channel, and energy loss is caused by vortices generated during water flow. Hydraulic efficiency decreases.
4. Cavitation on on the surface of the impeller. Due to the negative pressure generated during the operation of the blade's water surface, when the pressure Pk<Pva, air pockets and honeycomb surfaces are formed, which cause cavitation of the pump blades under the action of electrochemical corrosion.
5. Volume loss and mechanical loss. Due to the prolonged use of the pump, mechanical wear leads to leakage and increased resistance, resulting in a decrease in volumetric efficiency and mechanical efficiency.
The above reasons have led to a decline in the performance of the water pump. The operating efficiency is reduced by 2-5%, and in severe cases, the efficiency of the water pump can be reduced by more than 10%.

Send Inquiry

Home

Phone

E-mail

Inquiry