The working principle of the brake: When the elevator is in a stationary state, there is no current passing through the coils of the traction motor and electromagnetic brake. At this time, due to the lack of attraction between the electromagnetic core and the pressure of the brake spring on the brake pad, the brake wheel is tightly held to ensure that the motor does not rotate; At the moment when the traction motor is powered on and rotates, the coil in the brake electromagnet is simultaneously energized, and the electromagnet core quickly magnetizes and attracts, driving the brake arm to exert force on its brake spring. The brake pad opens and completely disengages from the brake wheel, allowing the elevator to operate; When the elevator car reaches the desired stop, the traction motor loses power and the coil in the brake electromagnet also loses power. The magnetic force in the electromagnetic core quickly disappears, and the core is reset by the brake arm under the action of the brake spring, causing the brake pad to once again hold the brake wheel, and the elevator stops working.
reducer
The reducer is used on a geared traction machine. Installed between the shaft of the traction motor and the shaft of the traction wheel.
Types and characteristics of reducers (gearboxes): Worm reducers are composed of a worm with an active shaft and a worm wheel with a driven shaft installed on a housing bearing. Their speed ratio can range from 18 to 120, and the number of teeth on the worm wheel is not less than 30. Their efficiency is not as good as gear reducers, but their structure is compact and their external dimensions are not large.
Characteristics of worm gear reducer: large transmission ratio, low noise, smooth transmission, and low reaction efficiency when the worm gear is driven by the worm wheel, with a certain degree of self-locking ability; It can increase the braking torque of the elevator and enhance the safety of elevator parking.
Nov 08, 2025
Leave a message
Construction And Working Principle Of Brake System
Previous
What Is A CouplingSend Inquiry




