A coupling is a device that connects the shaft of a traction motor to the worm shaft of a reducer, used to transmit torque from one shaft to another, and is also the braking wheel of a brake device. At the junction of the traction motor shaft end and the reducer worm shaft end.
The motor shaft and the reducer worm shaft are on the same axis, and when the motor rotates, it drives the worm shaft to also rotate. However, they are two different components that need to be connected to the same axis using appropriate methods to maintain a certain degree of coaxiality.
Types of Couplings:
Rigid coupling: For the structure of the worm shaft using sliding bearings, a rigid coupling is generally used because the clearance between the shaft and the bearing is relatively large, and the rigid coupling helps to stabilize the rotation of the worm shaft. Rigid couplings require a high degree of concentricity between the two shafts, and the difference in concentricity after connection should not exceed 0.02mm.
Elastic coupling: Due to the elastic deformation of the rubber block in the coupling when transmitting torque, it can automatically adjust the coaxiality between the motor shaft and the worm shaft within a certain range, allowing for a large concentricity (tolerance of 0.1mm) during installation, making installation and maintenance convenient. At the same time, the elastic coupling has a damping effect on vibration during transmission.
Nov 09, 2025
Leave a message
What Is A Coupling
Send Inquiry




