Ⅰ. Classified by deceleration method
1. Geared traction machine: The power of the traction device is transmitted to the traction wheel through the intermediate reducer of the traction machine, and the gearbox is usually driven by worm gear (also using helical gear transmission). This type of traction machine uses both AC and DC electric motors, and is generally used in low-speed elevators. The traction ratio is usually 35:2. If the power of the electric motor of the traction machine is transmitted to the traction wheel through the gearbox, it is called a geared traction machine and is generally used for low and medium speed elevators below 2.5m/s.
2. Gearless traction machine: The power of the traction device is transmitted directly to the traction wheel without the need for an intermediate reducer. Previously, most of these traction machines were powered by DC motors, but domestically developed AC permanent magnet synchronous gearless traction machines with independent intellectual property rights have been developed. The traction ratio is usually 2:1 and 1:1. Load capacity 320kg~2000kg, ladder speed 0.3m/s~4.00m/s. If the power of the electric motor is directly transmitted to the traction wheel without passing through the gearbox, it is called a gearless traction machine and is generally used for high-speed elevators and ultra high speed elevators with a speed of 2.5m/s or more.
3. Flexible transmission mechanism traction machine
II. Classified by Drive Motor
1. DC traction machines can be divided into DC toothed traction machines and DC toothless traction machines
2. AC traction machines can be divided into AC toothed traction machines, AC toothless traction machines, and permanent magnet traction machines The communication traction machine can be further divided into: worm gear pair traction machine, cylindrical gear pair traction machine, planetary gear pair traction machine, and other gear pair traction machines.
III. Classified by purpose
1. Traction machine for dual speed passenger and freight elevators
2. VVVF passenger elevator traction machine
3. Grocery traction machine
4. Non machine room traction machine
5. Vehicle elevator traction machine
Ⅳ. Classify by speed
1. Low speed traction machine (ν<1 meter/second)
2. Medium speed traction machine (fast traction machine) (ν=1 meter/second~2 meters) Seconds)
3. High speed traction machine (ν=2 m/s~5 m/s)
4. Ultra high speed traction machine (with a speed greater than 5 meters per second)
Ⅴ. Classified by structural form
1. Horizontal traction machine
2. Vertical traction machine




